RECALL FOR INSPECTION - C.A.M.P. NIMBUS LOCK CARABINER
From C.A.M.P.:
C.A.M.P. has received a limited number of notifications concerning the failure of the spring mechanism that activates the closure of the gate on the Nimbus Lock carabiner. The reports of failure have been limited to batch numbers 10 23 and later. The issue is easily identified if the carabiner is opened completely and does not automatically return to its closed position. The spring mechanism will break and the gate will not return to its closed position in affected units. C.A.M.P. is in the process of implementing a corrective action for future production of Nimbus Lock carabiners. Until the corrective action is in place, the company is issuing a recall for inspection for all Nimbus Lock carabiners with batch numbers after 10 23. The batch numbers included are: 10 23, 12 23, 02 24, 09 24, 10 24, 12 24, 01 25, 02 25, 06 25.
Affected products are Nimbus Lock carabiners:
- Nimbus Lock (ref. 2927 Gun metal / Green), (ref. 292702 Gun Metal / Fuchsia), (ref. 292703 Gun Metal / Blue)
- Nimbus Lock 3 Pack (ref. 3434)
- Locker Draw KS (ref. 3436) which includes a Nimbus Lock carabiner
- Energy CR3 Pack (ref. 2961) which includes a Nimbus Lock carabiner (harnesses and belay devices are not included in this recall)
- Energy Nova Pack ( ref. 2962) which includes a Nimbus Lock carabiner (harnesses and belay devices are not included in this recall)
The issue does not affect the strength of the carabiner when it is locked. There have been no reports of injury. C.A.M.P. is in the process of making a 100% inspection on all Nimbus Lock carabiners in stock at subsidiaries and distributors worldwide and is filing this information with the Consumer Product Safety Commission (CPSC). C.A.M.P. is issuing this recall for inspection out of an abundance of caution and recommends that customers stop use of their Nimbus Lock carabiners until they can be inspected.
We ask that you:
- Immediately stop using and inspect any Nimbus Lock carabiners for the affected batch numbers. The batch numbers for affected products are 10 23, 12 23, 02 24, 09 24, 10 24, 12 24, 01 25, 02 25, 06 25. The batch number is found on the side of the bottom of the carabiner on the side with technical strength markings with no brand logo (see the picture below).
- All units from the specified batch numbers should be returned to C.A.M.P. USA Inc. for inspection using the web form below. C.A.M.P. will promptly inspect returned units and communicate with customers about next steps based on inspection results. Affected units that do not pass the inspection will be replaced.
- Opening a carabiner is essential to using a carabiner for its designed function so it is possible to check for this issue on any carabiner with each use. Always make sure the gate closes automatically with each use. Additionally, locking carabiners like the Nimbus Lock should always be locked when in use.
We are aware of the inconvenience caused by this issue. Please accept our apologies. The safety of our customers is our top priority. Thank you for your cooperation and continued trust. Contact us anytime with questions:
C.A.M.P. USA Inc.
16050 Table Mountain Parkway
Suite 600
Golden, CO 80403Tel. (303) 465-9429
[ C.A.M.P. Recall Form for this notice available here: https://shopoutdoor-usa.camp.it/safety-notices/recall-for-inspection-camp-nimbus-lock-carabiner/#form ]
Frequently Asked Questions
Why is the Nimbus Lock being recalled?
C.A.M.P. has received a limited number of notifications concerning the failure of the spring mechanism that activates the closure of the gate on the Nimbus Lock carabiner. C.A.M.P. wishes to guarantee the best quality and functionality of all its products and is issuing this recall for inspection out of an abundance of caution and recommends that customers stop use of their Nimbus Lock carabiners until they can be inspected.
Have there been any accident or injuries with the Nimbus Lock?
There have been no reports of injury.
What action did you take?
C.A.M.P. is in the process of making a 100% inspection on all Nimbus Lock carabiners in stock at subsidiaries and distributors worldwide. C.A.M.P. is also in the process of implementing a corrective action for future production of Nimbus Lock carabiners.
What should I do with my Nimbus Lock?
Immediately stop using and inspect any Nimbus Lock carabiners for the affected batch numbers. All units from the specified batch numbers should be returned – at the company’s expense – to C.A.M.P. USA Inc. C.A.M.P. will promptly inspect returned units and return or replace units based on inspection results. Affected units that do not pass the inspection will be replaced.
How can I check if a Nimbus Lock has been inspected?
A * symbol will be engraved on the carabiner before the batch number (i.e. * 10 23) on all units inspected by C.A.M.P.
